Shop by vehicle
×
What fits my ride?
Shop By Vehicle
Shop By Vehicle
Shop By Vehicle
×
What fits my ride?
5 Inch Lift Kit | Dodge Ram 2500/3500 (00-02) 4WD
Brand:
Zone Offroad
SKU:
ZOND47N
×
- $1,081.37
- $1,081.37
- Unit price
- per
List Price
Your Price
Go big and go anywhere with this 5" Lift Kit for your truck that gives you clearance for huge tires up to 35". This kit has everything you need to raise your 4WD 2000 - 2002 Dodge / Ram 2500/3500 Truck. If you're going to do it, do it right.
Features & Benefits
- 100% bolt-on design for easy installation.
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
- Heavy-duty front track bar bracket correctly positions front axle under vehicle.
- Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
Recommended Tires & Wheels
(Trimming may be required)
- 35 x 12.5 with 16 x 8 and 4 in. Backspace
- 35 x 12.5 with 17 x 9 and 4 in. Backspace
- 35 x 12.5 with 18 x 9 and 4 in. Backspace
Shock Option
Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- Self-lubricating seals
- Black powder coat finish
FOX 2.0 Adventure Series
- 2-inch diameter steel body
- Internal floating piston (IFP) monotube design
- Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
- If truck is equipped with a proportioning valve a relocation bracket kit is required. Add in configuration / checkout.
- Dodge Rams were manufactured with two different front sway bar link setups. Some were mounted ABOVE the axle bracket and some BELOW. If your mode's sway bar links are above the axle bracket, a sway bar link kit is required. Add in configuration / checkout.
- If your vehicle is equipped with a top mounted overload/helper spring, 4 longer U-bolts may be required.
- Factory block is replaced with 5" block and add-a-leaf combo to obtain a level stance.
- Factory Rear Sway Bar? If your vehicle is equipped with a factory rear sway bar, a rear sway bar link kit is recommended. Add in configuration / checkout.
- Factory wheels fit when paired with factory / original equipment tire size.
- Will NOT fit models built before February 9, 1994 due to track bar stud size.
- Steering Stabilizer Required! Due to the factory drag link flip when installing this kit the factory steering stabilizer cannot be reinstalled.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Choosing a selection results in a full page refresh.